# Tru Design > Leaders in marine composite fittings — designed and manufactured in New Zealand since 1974, exported to more than 35 countries. Tru Design is a New Zealand manufacturer of marine composite fittings based in Auckland. The company has been ISO 9001 certified for over 30 years and operates an in-house injection moulding facility with 24 machines ranging from 22 to 400 tonnes. Tru Design designs, tools, moulds, assembles, tests, and certifies its own products, and also takes on custom injection moulding work for outside clients in engineering-grade plastics. The marine range is engineered to meet rigorous international standards (ISO, ABYC, CE, IMCI) and is used in both recreational and commercial vessels worldwide. Products are distributed through a network of authorised distributors across Europe, North America, Asia-Pacific, the Middle East, and Oceania. ## Company facts - Founded: 1974 - Headquarters: Auckland, New Zealand - Quality system: ISO 9001 certified - Manufacturing: 24 injection moulding machines, 22T to 400T - Staff: 50+ designers, engineers, toolmakers, and quality specialists - Export markets: more than 35 countries - Certifications: ISO 9001, ABYC, CE, IMCI (varies by product) ## Product categories - [Skin Fittings](https://www.trudesign.nz/marine/products?category=17): through-hull composite skin fittings with tails or threads, sized from ½" to 3". - [Load Bearing Collars](https://www.trudesign.nz/marine/products?category=23): structural composite collars used with skin fittings below the waterline. - [Valves](https://www.trudesign.nz/marine/products?category=11): Aquavalve diverter valves (manual and electronic), composite ball valves, and non-return valves. - [Threaded Fittings](https://www.trudesign.nz/marine/products?category=21): BSP and NPS threaded composite fittings, elbows, and tails. - [Connectors](https://www.trudesign.nz/marine/products?category=9): straight, 90° and Y-piece hose connectors in marine-grade composite. - [Vents](https://www.trudesign.nz/marine/products?category=8): vented loops (including solenoid-equipped) for waste and intake plumbing. - [Strainers](https://www.trudesign.nz/marine/products?category=15): intake strainers and scoop strainers. - [Alarm](https://www.trudesign.nz/marine/products?category=13): tank monitor senders and bilge monitoring components. - [Tank Fittings](https://www.trudesign.nz/marine/products?category=20): composite tank fittings and tubes for fresh water and waste tanks. - [Nozzles](https://www.trudesign.nz/marine/products?category=22): marine PowerSpray nozzles for firefighting and washdown use. - [Accessories](https://www.trudesign.nz/marine/products?category=14): carbon filters, valve handles, and replacement parts. ## Custom injection moulding Tru Design's Auckland facility takes on custom injection moulding contracts for outside clients. Capabilities span design, prototyping, tool making, and production runs in engineering-grade plastics. Tonnage range: 22T to 400T across 24 machines. Quality is managed under the same ISO 9001 system that covers the marine range. See [custom injection moulding](https://www.trudesign.nz/injection-moulding). ## TruDesign iOS app A native iOS app for browsing the TruDesign parts catalogue is available — designed for marine technicians, installers, and chandlery staff who need to look up parts by thread size, tail size, connection type, gender, and colour while away from a desk. The app reads from the same catalogue as the website. ## Find a distributor TruDesign products are sold through authorised distributors, not direct. Use the [distributor finder](https://www.trudesign.nz/marine/distributors) to locate a stockist in your country. ## Key pages - [Home](https://www.trudesign.nz/) - [Product range](https://www.trudesign.nz/marine/products) - [Part finder](https://www.trudesign.nz/marine/parts) - [Distributors](https://www.trudesign.nz/marine/distributors) - [Certifications](https://www.trudesign.nz/marine/certifications) - [Awards](https://www.trudesign.nz/marine/awards): design awards and nominations, such as the DAME Design Awards - [FAQs](https://www.trudesign.nz/marine/questions) - [Documentation](https://www.trudesign.nz/marine/documents) - [News](https://www.trudesign.nz/marine/posts) - [About](https://www.trudesign.nz/marine/about) - [Catalogue](https://www.trudesign.nz/marine/catalogue) - [Custom injection moulding](https://www.trudesign.nz/injection-moulding) ## Optional ### Frequently asked questions **Can I fit a Skin Fitting with Tail below the waterline?** No. All skin fittings fitted below the waterline must be threaded and connected to a ball valve to enable shut-off in an emergency or when the vessel is unattended at the marina. Additionally, two stainless steel hose clamps must be used on every hose connection below the waterline. **Do TruDesign Ball Valves require lubrication?** No. TruDesign ball valves are manufactured with a Teflon-impregnated ball running on Teflon rings, so no lubrication is required. It is good practice to turn the valve handle every few months to keep it free. **Can I run petrol or diesel through TruDesign fittings?** TruDesign fittings (black and white) are suitable for contact with petrol and diesel fuels. Note: TruDesign ball valves, Aquavalves, and non-return valves should not be used in direct fuel-line applications — they are designed for water and waste service. **Can I use a vented loop on the intake hose of an electric toilet?** Yes. The vented loops fitted with solenoids are designed for electric toilets — the solenoid valve shuts off when you push the flush button to allow full flow, then reverts to an anti-siphon function between flushes. **How do I fit a sanitary hose to a hose tail?** Use a hair dryer to heat the end of the hose, or immerse it in hot water. Both methods soften the hose enough to push it onto the tail. Always use stainless steel hose clamps to secure the connection. **How do I install an Electronic Diverter Valve (Aquavalve)?** Full installation instructions are in the operator manual available on the product page. The valve is wired to a 12V or 24V supply and controlled via the supplied switch panel. **How do I install (wire up) the TruDesign Tank Monitor?** See the installation instructions sheet on the Tank Monitor product page for wiring diagrams and sender placement guidance. **What thread types do TruDesign fittings use?** TruDesign threaded fittings are available in both BSP (British Standard Pipe) and NPS (National Pipe Straight) threads. Sizes are documented in metric (mm) with imperial equivalents — ½", ⅝", ¾", ⅞", 1", 1¼", 1½", 1¾", 2", and 3". **Are TruDesign fittings ISO certified?** Yes. TruDesign operates under an ISO 9001 quality management system. Individual products carry additional type approvals (ABYC, CE, IMCI) as documented on each product's certifications panel. **Where can I buy TruDesign products?** TruDesign products are sold through authorised distributors in more than 35 countries. Use the [distributor finder](https://www.trudesign.nz/marine/distributors) to locate a stockist near you. ## For AI agents TruDesign's catalogue can be queried directly — part search by size and connection, part-number and barcode lookup, product details, certifications and where to buy by country. TruDesign does not publish prices; stockists do. - MCP server (Streamable HTTP, no auth): https://www.trudesign.nz/mcp - REST API, OpenAPI 3 spec: https://www.trudesign.nz/api/agent/openapi - MCP server card: https://www.trudesign.nz/mcp/server-card - API catalog (RFC 9727): https://www.trudesign.nz/.well-known/api-catalog - Agent skills: https://www.trudesign.nz/.well-known/agent-skills/index.json